40A MPPT EPsolar Tracer4210RN MPPT Solar Charge Controller Regulators

40A MPPT EPsolar Tracer4210RN MPPT Solar Charge Controller Regulators

CODE: Tracer4210RN

List price: $96.50  

$86.50

You save: $10.00 (10%)
-10%
In stock

40A MPPT EPsolar Tracer4210RN MPPT Solar Charge Controller Regulators

Tracer series controller adopts latest MPPT technology (Maximum Power Point Tracking) and advanced tracking algorithm to make the solar module operate at ideal voltage which the solar modules can product the maximum available power. Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed. The ability to step-down the higher voltage solar module to recharge a lower voltage battery bank greatly increases system design flexibility. The cable size can be reduced because of the small current from the solar array.
The Tracer series controller is for off-grid solar system and control the charging and discharging of the battery, especially suitable for the street light system. The controller features a smart tracking algorithm inside that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

Features

System Voltage 12 / 24VDC
Rated Battery Current 45A
Rated Load Current 20A
Max. PV Input Power 12V System 585W ; 24V System 1170W

Key features:

·MPPT technology
·Peak conversion efficiency of 97 %
·High Tracking efficiency of 99%
·Several seconds tracking speed
·Very fast Sweeping of the entire I-V curve
·4- Stage charge with PWM output
·Excellent thermal design and nature air cooling ·Full power output in ambient temperatures up to 45℃
·Temperature compensation function
·Sealed, Gel, Flooded battery type optional
·Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
·RJ45 interface with optional remote meter
·Standard 2 years warranty
·CE certificate

 

Technical specifications
Tracer-4215RN MPPT Solar controller
Electrical Parameters  
Description
Parameter
Nominal System Voltage
12VDC / 24VDC Auto work
Rated Battery Current
45A
Maximum Battery Voltage
32V
Max. Solar Input Voltage
150VDC
Max. PV input power
12V/ 585W
24V /1170W
Self-consumption*
<10mA(24V)
Charge Circuit Voltage Drop
≤0.26V
Discharge Circuit Voltage Drop
≤0.15V
Communication
TTL232 / 8pin RJ45

Environmental parameters
Environmental  parameters
Parameter
Working temperature
-35℃ to +55℃
Storage temperature
-35℃to +80℃
Humidity
10%-90% NC
Enclosure
IP30

Mechanical Parameters
 Mechanical
Parameter
Dimension
242x 169 x 91 / mm
Mounting holes 180 x 160/ mm
Mounting hole size
Φ5
Terminal
25mm2
Weight
2.05kg

 

Type the characters you see in the picture above.

Loading...